>=2,000 U/mg High-Activity Alkaline Phosphatase for Antibody Labeling
Research
Online Inquiry

>=2,000 U/mg High-Activity Alkaline Phosphatase for Antibody Labeling

Cat.No: IEC-HMM-0145 Datasheet

Quantities:
- +
Product Details Related Products
Product Name >=2,000 U/mg High-Activity Alkaline Phosphatase for Antibody Labeling
Catalog No. IEC-HMM-0145
Description Alta DiagnoTech high-activity alkaline phosphatase is a colorless to light-red solution suitable for antibody labeling, chemiluminescence reagent development and ALP controls.
Intended Use ALP assay calibrator or quality-control material and enzyme label for antibodies and general chemiluminescence reagents.
Principle / Technology ALP hydrolyzes colorless disodium p-nitrophenyl phosphate to pale-yellow p-nitrophenol, whose formation is monitored photometrically.
Detection Method SFBC kinetic absorbance assay at 405 or 410 nm
Performance Range / Specifications Specific activity is at least 2,000 U/mg protein, purity is at least 95% by SDS-PAGE and the stated assay range is 0-600 U/L.
Reaction Conditions / Protocol Use R1:sample:R2 at 1,000:20:200, incubate at 37 degrees C for 60 seconds and measure the A405 or A410 increase over the following 120 seconds; stated factor 3,298.
Storage Conditions Store at 2-8 degrees C and avoid freeze-thaw cycles
Shelf Life At least 2 years at 2-8 degrees C
Product Form Colorless to light-red solution; lyophilized form is stable with PBS and BSA
Purity >=95% by SDS-PAGE
Molecular Weight Approximately 56 kDa
pH Range / Optimal pH Stable at pH 6.5-11.5 for 24 hours at 25 degrees C; optimum pH 11.0-11.2
Recommended Buffer System 50 mM potassium phosphate, 1 mM MgCl2, 0.1 mM CoCl2 and 0.1% NaN3 at pH 7.5
Appearance Colorless to light-red solution
Alias Alkaline Phosphatase, High Activity
Product Type High-activity alkaline phosphatase raw material
Function / Efficacy Provide high ALP activity for antibody conjugation, chemiluminescence and control materials.
Abbreviation ALP
Customization Specifications can be customized
Specific Activity >=2,000 U/mg protein
Isoelectric Point Approximately 4.62
Inhibitors EDTA and EGTA
Optimal Temperature Activity increases from 20 to 60 degrees C; the value at 37 degrees C is 3.3 times the value at 25 degrees C
Thermal Stability Stable below 45 degrees C; retains more than 50% activity after 30 minutes at 60 degrees C; inactive above 70 degrees C
Activator 0.1 mM CoCl2
Detection Wavelength 405 or 410 nm
Linear Range 0-600 U/L

For research use only, not for clinical use.

0
0

There is no product in your cart.