- Home
- IVD
- By Technology Types
- By Diseases Types
- By Product Types
- Research
- Resource
- Distributors
- Company
| Product Name | Syringe Filters, PVDF Membrane, 0.22 um Pore Size, 13 mm Diameter, Sterile, Non-Pyrogenic |
| Catalog No. | IGM-HMM-0072 |
| Description | Sterile syringe filters with hydrophilic polyvinylidene fluoride (PVDF) membrane, 0.22 um pore size, and 13 mm diameter housing, individually blister-packed and gamma-irradiated. The hydrophilic PVDF membrane provides low protein binding (typically |
| Intended Use | Sterile filtration of: aqueous solutions (buffers, media, reagents); protein and antibody solutions; cell culture media and supplements; pharmaceutical and biotechnology solutions; HPLC and UPLC mobile phases (aqueous); clarification of small-volume samples prior to chromatography; and removal of bacterial contaminants from heat-sensitive biological fluids. |
| Principle / Technology | Size-exclusion filtration: the PVDF membrane contains a network of interconnected pores with 0.22 um nominal pore size rating. Particles larger than the pore size (including bacteria: 0.2-2 um; yeast: 3-5 um; particulates: >0.22 um) are retained on the membrane surface or within the depth of the membrane matrix. Hydrophilic PVDF is naturally water-wettable without pre-wetting, enabling direct filtration of aqueous solutions without surfactant treatment. Low protein binding minimizes adsorptive losses of dilute protein solutions. |
| Detection Method | 1) Aseptically remove filter from blister pack; 2) Attach Luer-lock syringe (filled with solution to be filtered) to filter inlet (female Luer-lock); 3) Attach sterile receiving vessel or needle to filter outlet (male Luer-slip); 4) Apply gentle, steady pressure to syringe plunger; filter into sterile container; 5) For maximum recovery, expel residual volume with a small volume of air after filtration. |
| Sample Type | Aqueous solutions: buffers, cell culture media, serum-containing media, protein solutions, antibody solutions, DNA/RNA solutions, pharmaceutical preparations, and HPLC mobile phases; sample volume 1-10 mL per filter with standard syringe (filter capacity 5-20 mL depending on solution particulate load). |
| Performance Range / Specifications | Membrane: hydrophilic PVDF; pore size: 0.22 um (nominal); diameter: 13 mm; effective filtration area: approximately 0.65 cm^2; housing: polypropylene; connections: female Luer-lock inlet, male Luer-slip outlet; hold-up volume: <30 uL (post-air purge); burst pressure: >60 psi (4.1 bar); flow rate: >15 mL/min for water at 10 psi (gravity to moderate pressure); sterility: SAL 10^-6 (gamma irradiated). |
| Sensitivity / LOD | Bacterial retention: retains >10^7 CFU Brevundimonas diminuta per cm^2 (ASTM F838 standard); particle retention: >99.99% of 0.22 um and larger particles. |
| Specificity | PVDF membrane: hydrophilic, low protein binding; compatible with aqueous and mild organic solutions (alcohols up to 50%, DMSO up to 50%, acetonitrile up to 50%); not recommended for strong acids (concentrated HNO3, H2SO4, HCl), strong bases (NaOH >1 M), or halogenated solvents (chloroform, dichloromethane). |
| Reaction Conditions / Protocol | Filtration at RT; flow rate decreases as membrane becomes loaded with particulates; replace filter if flow rate drops significantly or if >20 mL filtered through single 13 mm filter. |
| Components / Formulation | Sterile PVDF Syringe Filters, 0.22 um, 13 mm, individually blister-packed, 50 filters per box. |
| Storage Conditions | Store at RT (15-25 C) in original packaging, protected from dust, moisture, and direct sunlight; do not open blister pack until ready to use. |
| Shelf Life | 36 months from date of manufacture at RT in original sealed packaging. |
| Package Specifications | Box of 50 individually blister-packed filters; case of 10 boxes (500 filters). |
| Product Form | White hydrophilic PVDF membrane in polypropylene housing (white or color-coded for pore size); individually blister-packed. |
| Quality Control | Each lot: pore size (bubble point >16 psi in water); bacterial retention (B. diminuta challenge, >10^7 CFU/cm^2); integrity (no leakage at 30 psi); flow rate (>15 mL/min water at 10 psi, 25 C); cleanliness (particulates <10 per filter >25 um); protein binding (<5 ug BSA/cm^2); sterility (SAL 10^-6); endotoxin: <0.1 EU/device; cytotoxicity: non-cytotoxic per USP <87>. |
| Key Features | 0.22 um hydrophilic PVDF membrane; sterile and non-pyrogenic; low protein binding (<5 ug/cm^2); 13 mm for 1-10 mL volumes; individually blister-packed; female Luer-lock inlet; male Luer-slip outlet; gamma irradiated. |
| Purity | PVDF: virgin resin; no surfactants, wetting agents, or mold release agents; extractables: <0.5% of filter weight (water and ethanol extraction); no detectable heavy metals. |
| Concentration | Not applicable; filter device. |
| Activity / Unit Definition | Bacterial retention: log reduction value (LRV) >7 for B. diminuta; particle retention: >99.99% for 0.22 um particles. |
| Molecular Weight | PVDF: (C2H2F2)n, average MW 300,000-700,000 g/mol; polypropylene housing: (C3H6)n. |
| Source / Origin | PVDF membrane: cast from virgin PVDF resin; polypropylene housing: medical-grade virgin polypropylene; manufactured in ISO Class 8 cleanroom; gamma irradiated at 25-40 kGy; no animal-derived components. |
| pH Range / Optimal pH | PVDF compatible pH 1-14; polypropylene housing compatible pH 1-14; recommended operating pH 2-12 for extended use. |
| Shipping Conditions | Ambient temperature; protect from crushing and moisture. |
| Expiration Date / Stability | 36 months at RT in original packaging; sterility maintained until blister pack opened. |
| Regulatory / Compliance | For research use only; not for diagnostic or therapeutic use. Not for human injection or implantation. CE marked for laboratory use. Manufactured under ISO 13485. Bacterial retention validated per ASTM F838. |
| Compatibility | Compatible aqueous solutions: water, buffers (phosphate, Tris, HEPES, carbonate, borate, acetate, citrate), saline, cell culture media (DMEM, RPMI, MEM, DMEM/F12, IMDM) with or without serum (0-20%), protein solutions, antibody solutions, nucleic acid solutions, sugar solutions, and most biological fluids. Limited organic solvent compatibility: alcohols (methanol, ethanol, isopropanol up to 50%), DMSO (up to 50%), acetonitrile (up to 50%), acetone (up to 30%). Not compatible: concentrated mineral acids (HCl >1 M, HNO3 >1 M, H2SO4 >1 M), strong bases (NaOH >1 M), halogenated solvents (dichloromethane, chloroform), THF, DMF, and pyridine. For DMSO >50% or aggressive organic solvents, use PTFE membrane filters. |
| Recommended Buffer System | Compatible with all standard aqueous buffer systems; low extractables compatible with HPLC and LC-MS mobile phases. |
| Application Notes / Precautions | Pre-wet the filter by passing 0.5-1 mL of solution through the filter and discarding the filtrate (removes any potential extractables from the membrane and housing). For protein solutions: PVDF has the lowest protein binding among common membrane types (PVDF < PES < nylon < nitrocellulose); use PVDF for dilute protein solutions to maximize recovery. When filtering cell culture media with serum: serum proteins may coat the membrane and reduce effective pore size — use a 0.45 um pre-filter for serum-containing media followed by 0.22 um sterilization. Apply gentle, steady pressure; excessive pressure may cause membrane rupture or housing failure. Do not exceed 60 psi. For maximum recovery of small volumes, purge filter with a small volume of air after the solution has passed through. Single-use only; do not reuse or resterilize. |
| Batch-to-Batch Consistency | Bubble point >16 psi for every lot; bacterial retention LRV >7; flow rate >15 mL/min; protein binding <5 ug/cm^2; sterile and non-pyrogenic. |
For research use only, not for clinical use.
|
There is no product in your cart. |