Yeast Plasmid Extraction Kit (Spin Column)
Research
Online Inquiry

Yeast Plasmid Extraction Kit (Spin Column)

Cat.No: RESK-0770 Datasheet

Quantities:
- +
Product Details Related Products
Product Name Yeast Plasmid Extraction Kit (Spin Column)
Catalog No. RESK-0770
Description This kit extracts plasmid DNA from yeast using an enzymatic cell-wall disruption step. The included yeast cell-wall lytic enzyme efficiently breaks down the yeast cell wall to improve plasmid DNA yield. The silica-based matrix in the spin column binds DNA with high efficiency and specificity, maximizing removal of contaminating proteins and other cellular organic compounds. The extracted yeast plasmid DNA is suitable for a variety of routine molecular biology applications, including restriction digestion, PCR, sequencing, ligation, and transformation. The procedure requires no toxic reagents such as phenol or chloroform and is safe to operate.
Intended Use Extraction and purification of plasmid DNA from yeast cultures for downstream molecular biology applications such as restriction digestion, PCR, sequencing, ligation, and transformation. For research use only.
Principle / Technology Enzymatic disruption of the yeast cell wall followed by alkaline lysis and silica-membrane spin-column purification. DNA selectively binds to the silica matrix while proteins and other impurities are removed by wash steps, and purified plasmid DNA is recovered by low-salt elution.
Detection Method Plasmid yield can be assessed by agarose gel electrophoresis and UV spectrophotometry; because yeast plasmid copy number is usually low, detection is best performed by PCR or by transformation into E. coli.
Sample Type 1-5 mL of yeast culture (no more than 5 x 10^7 cells)
Performance Range / Specifications Efficient enzymatic cell-wall disruption for improved plasmid yield; high-efficiency, specific DNA adsorption on silica membrane; phenol/chloroform-free procedure.
Specificity The silica-membrane matrix binds DNA with high specificity, enabling maximal removal of contaminating proteins and other cellular organic compounds.
Reaction Conditions / Protocol 1. Centrifuge 1-5 mL yeast culture (no more than 5 x 10^7 cells) at 12,000 rpm for 1 min and remove the supernatant. For larger volumes, collect the cell pellet in one tube by repeated centrifugation.
2. Cell-wall disruption: resuspend the pellet in 470 uL of wall-disruption buffer, add 25 uL of yeast cell-wall lytic enzyme and 5 uL of thiol reducing agent, mix well, and incubate at 37 °C for 1-2 h, inverting the tube several times during incubation. Centrifuge at 12,000 rpm for 1 min, discard the supernatant, and keep the pellet.
3. Add 250 uL of Solution YP1 (confirm that RNase A has been added) and fully resuspend the pellet. Incomplete resuspension impairs lysis and reduces plasmid yield and purity.
4. Add 250 uL of Solution YP2 and gently invert 6-8 times to lyse the cells. Mix gently to avoid contamination with bacterial genomic DNA; the lysate should become clear and viscous. Do not exceed 5 min to avoid damaging the plasmid.
5. Add 350 uL of Solution YP3 and immediately invert gently 6-8 times until a white flocculent precipitate forms. Centrifuge at 12,000 rpm for 10 min and carefully transfer the supernatant to a clean tube without disturbing the pellet. If fine white precipitate remains, centrifuge again and recover the supernatant.
6. Apply the supernatant to the spin column, let stand at room temperature for 2 min, centrifuge at 12,000 rpm for 1 min, discard the flow-through, and place the column back into the collection tube.
7. Add 600 uL of wash buffer (confirm that absolute ethanol has been added), centrifuge at 12,000 rpm for 1 min, and discard the flow-through.
8. Repeat the wash step with 600 uL of wash buffer.
9. Centrifuge at 12,000 rpm for 2 min, then leave the open column at room temperature or in a 50 °C incubator for several minutes to remove residual wash buffer; residual ethanol can interfere with downstream applications such as restriction digestion and PCR.
10. Place the column in a clean tube, add 30-50 uL of elution buffer preheated to 65 °C onto the center of the membrane, let stand at room temperature for 2 min, and centrifuge at 12,000 rpm for 1 min.
11. To increase recovery, reapply the eluate to the column, let stand at room temperature for 2 min, and centrifuge at 12,000 rpm for 1 min.
Components / Formulation Wall-disruption buffer
Yeast cell-wall lytic enzyme
Thiol reducing agent
Solution YP1 (add RNase A before use)
Solution YP2
Solution YP3
Wash buffer (add absolute ethanol before use)
Elution buffer
Spin columns and collection tubes
Storage Conditions Store at 2-8 °C in a dry environment.
Shelf Life 2 years
Package Specifications 50 T
100 T
Product Form Kit with spin columns and ready-to-use buffers
pH Range / Optimal pH If water is used for elution, its pH should be around 8.0 (adjustable with NaOH); a pH below 7.0 reduces elution efficiency.
Application Notes / Precautions 1. Before use, check Solutions YP2 and YP3 for turbidity; if turbid, warm in a 37 °C water bath for a few minutes until clear.
2. Use no less than 50 uL of elution buffer; smaller volumes reduce recovery. Eluent pH affects elution efficiency. Store DNA products at -25 to -15 °C to prevent degradation.
3. Plasmid yield depends on the yeast strain, plasmid copy number, and culture conditions. Yeast plasmid copy number is typically low and may be difficult to detect by electrophoresis or spectrophotometry; verify by PCR or transformation into E. coli.
4. DNA concentration and purity: an OD260 of 1 corresponds to approximately 50 ug/mL double-stranded DNA or 40 ug/mL single-stranded DNA. The OD260/OD280 ratio should be 1.7-1.9. If deionized water is used for elution instead of elution buffer, the ratio may be lower because pH and ionic conditions affect absorbance; this does not necessarily indicate low purity.

For research use only, not for clinical use.

0
0

There is no product in your cart.