- Home
- IVD
- By Technology Types
- By Diseases Types
- By Product Types
- Research
- Resource
- Distributors
- Company
| Product Name | Pro Endo-Free Plasmid Maxi Extraction Kit (Ultra-Pure) |
| Catalog No. | RESK-0756 |
| Description | This ultra-pure kit enables the rapid, large-scale extraction of 0.5-4 mg of pure, high-copy-number plasmid DNA from 50-200 mL of culture (100-200 mL for LB medium; 50-100 mL for 2YT medium), with a recovery rate of 80-90%. The spin columns contain a novel silica matrix membrane which, combined with an optimized lysis buffer formulation, maximizes the recovery of high-purity DNA. An included push-rod filter simplifies operation by eliminating the need to carefully aspirate the supernatant, and yields even purer plasmid. The extracted DNA is of high purity with extremely low endotoxin levels ( |
| Intended Use | Rapid large-scale extraction and purification of ultra-pure, ultra-low-endotoxin high-copy plasmid DNA from 50-200 mL E. coli cultures (LB: 100-200 mL; 2YT: 50-100 mL); purified DNA is suitable for transfection of routine and sensitive/fragile cells, restriction digestion, transformation, PCR, in vitro transcription, and sequencing. |
| Principle / Technology | Alkaline lysis followed by enhanced endotoxin removal and binding of plasmid DNA to a high-capacity silica membrane spin column; an included push-rod filter replaces manual supernatant transfer, delivering simplified operation and even purer plasmid preparations. |
| Sample Type | 50-200 mL E. coli culture (100-200 mL in LB medium; 50-100 mL in 2YT medium) containing high-copy plasmid DNA. |
| Performance Range / Specifications | Starting culture volume: 50-200 mL (LB: 100-200 mL; 2YT: 50-100 mL) Typical yield: 0.5-4 mg of pure high-copy plasmid DNA Column binding capacity: up to 4 mg Recovery rate: 80-90% Endotoxin level: <0.01 EU/ug DNA (for mid/high-copy plasmids), suitable for transfection of sensitive/fragile cells Compatible with both fixed-angle rotors (high-speed centrifugation) and swing-bucket rotors (high throughput) |
| Reaction Conditions / Protocol | 1. Harvest bacterial cells from 50-200 mL culture by centrifugation. 2. Resuspend the pellet in resuspension buffer containing RNase A. 3. Lyse the cells with alkaline lysis buffer and neutralize to precipitate genomic DNA, proteins, and debris. 4. Clarify the lysate conveniently using the included push-rod filter, avoiding careful manual aspiration of the supernatant. 5. Apply the clarified lysate to the spin column and perform the enhanced endotoxin removal procedure. 6. Wash the column with wash buffer(s) to remove contaminants and residual endotoxin. 7. Elute the purified plasmid DNA with elution buffer or nuclease-free water; two elutions of 1.2 mL each can be used to maximize recovery. |
| Components / Formulation | High-capacity silica membrane spin columns (up to 4 mg binding capacity) and collection tubes Push-rod filter for convenient lysate clarification Resuspension buffer Alkaline lysis buffer Neutralization/binding buffer Endotoxin removal solution Wash buffer (ethanol to be added before first use) Elution buffer RNase A (10 mg/mL) |
| Storage Conditions | Part I component, RNase A (10 mg/mL): store at -15 to -25 °C; Part II components: store at room temperature. |
| Shelf Life | 18 months when stored as directed. |
| Package Specifications | 2 T; 10 T |
| Product Form | Kit containing spin columns, push-rod filter, and ready-to-use buffer solutions. |
| Quality Control | Each lot is verified for plasmid yield (0.5-4 mg), purity, and endotoxin removal efficiency (<0.01 EU/ug DNA, confirmed by Limulus amebocyte lysate assay); silica membrane columns provide consistent binding capacity across columns and batches. |
| Purity | Ultra-pure plasmid DNA with extremely low endotoxin levels (<0.01 EU/ug DNA for mid/high-copy plasmids), suitable for transfection of sensitive/fragile cells. |
| Expiration Date / Stability | Stable for 18 months from the date of manufacture when components are stored under the recommended conditions. |
| Regulatory / Compliance | For research use only. |
| Compatibility | Compatible with both fixed-angle (high-speed) and swing-bucket (high-throughput) centrifuge rotors. Purified DNA is compatible with transfection of routine and sensitive/fragile cell lines, restriction digestion, transformation, PCR, in vitro transcription, and sequencing. |
| Recommended Buffer System | Use the kit-provided resuspension, lysis, neutralization/binding, endotoxin removal, wash, and elution buffers; add ethanol to the wash buffer as instructed before first use; RNase A (10 mg/mL) is added to the resuspension buffer. |
| Application Notes / Precautions | - Use the push-rod filter to clarify lysates conveniently and consistently, yielding purer plasmid. - Add RNase A (10 mg/mL) to the resuspension buffer before first use and store the supplemented buffer at 2-8 °C. - Add the correct volume of ethanol to the wash buffer before first use. - Two sequential elutions (e.g., 1.2 mL each) can maximize plasmid recovery. - Pre-warm the elution buffer to improve elution efficiency. - This kit (<0.01 EU/ug) is recommended for sensitive/fragile cell transfection; for routine transfection, a standard endo-free maxi kit (<0.1 EU/ug) is sufficient. |
| Batch-to-Batch Consistency | Specially manufactured silica membrane columns provide minimal column-to-column and batch-to-batch variation in binding capacity, ensuring reproducible yields. |
For research use only, not for clinical use.
|
There is no product in your cart. |