Research
Online Inquiry

Exosome DNA Isolation Kit

Cat.No: RESK-0780 Datasheet

Quantities:
- +
Product Details Related Products
Product Name Exosome DNA Isolation Kit
Catalog No. RESK-0780
Description The Exosome DNA Isolation Kit is specifically developed for exosomes derived from cell culture supernatant or body fluids (such as serum/plasma). Using an optimized lysis buffer, it efficiently releases DNA from exosomes obtained by various methods such as ultracentrifugation, chemical precipitation, immunocapture or size-exclusion chromatography, followed by convenient and efficient purification and elution on a nucleic acid-specific adsorption spin column. The resulting high-purity exosomal DNA can be used directly in downstream applications, including real-time quantitative PCR, gene mutation detection, next-generation sequencing and gene chip analysis.
Intended Use Extraction and purification of DNA from exosomes derived from cell culture supernatant or body fluids (serum/plasma) for downstream real-time quantitative PCR, gene mutation detection, next-generation sequencing and gene chip analysis.
Principle / Technology Optimized lysis buffer with proteinase K digestion to release exosomal DNA, followed by ethanol-based binding to a nucleic acid-specific adsorption spin column, washing and elution.
Sample Type Exosomes isolated from cell culture supernatant or body fluids (serum/plasma); 200 μL exosome solution per preparation (if less than 200 μL, make up to 200 μL with 1x PBS). Recommended starting material: cell culture supernatant >=20 mL; serum/plasma >=1 mL. Reference particle count: 10^11-10^12 particles/mL.
Performance Range / Specifications Spin column DNA binding capacity: 50 μg; each column can be loaded up to 3 times.
Most exosomal DNA is fragmented genomic DNA of approximately 100-300 bp at low concentration; the normal A260/280 ratio is 1-1.6, and a low ratio does not affect downstream applications.
Reaction Conditions / Protocol 1. Exosomal DNA release: Add 200 μL of isolated exosome solution to a 1.5 mL centrifuge tube, then add 10 μL (cell culture supernatant-derived exosomes) or 20 μL (blood-derived exosomes) of proteinase K solution, followed by 200 μL of Lysis Buffer R. Mix on a vortex mixer, cap the tube and incubate in a 56 °C water bath for 10 min.
2. Exosomal DNA binding: Invert the lysed exosome sample several times, add 400 μL of pre-chilled absolute ethanol and let stand at -20 °C for 10 min. Transfer the solution to the spin column in two aliquots of 400 μL each, centrifuge at 12,000 rpm for 30 sec at room temperature, discard the filtrate in the collection tube and place the column back into the collection tube. Repeat until the entire sample has been passed through the column.
3. Exosomal DNA washing: Add 500 μL of Wash Buffer A to the column, let stand for 2 min, centrifuge at 12,000 rpm for 1 min at room temperature and discard the waste. Add 500 μL of Wash Buffer B (add the specified volume of absolute ethanol before first use), let stand for 2 min, centrifuge at 12,000 rpm for 1 min at room temperature and discard the waste. Repeat the Wash Buffer B wash once more (two washes in total). Centrifuge the empty column at 12,000 rpm for 1 min at room temperature, transfer the column to a collection tube, open the lid and let stand for 5 min to evaporate residual ethanol.
4. Exosomal DNA elution: Preheat Elution Buffer E in a 56 °C water bath for 10-15 min. Transfer the column to a new 1.5 mL centrifuge tube (provided), add 30 μL of preheated Elution Buffer E dropwise to the center of the column membrane, let stand for 2 min and immediately centrifuge at 12,000 rpm for 2 min at room temperature. Reapply the eluate to the column, let stand for 2 min and centrifuge at 12,000 rpm for 2 min at room temperature. The liquid in the collection tube is the extracted exosomal DNA, which can be used directly in downstream experiments or stored at -80 °C.
All centrifugation steps are performed at room temperature; centrifugation at 4 °C reduces DNA yield.
Components / Formulation Proteinase K (20 mg/mL): 600 μL (30 T) / 1.0 mL (50 T), 2-8 °C
Lysis Buffer R: 7 mL (30 T) / 10 mL (50 T), room temperature
Wash Buffer A: 15 mL (30 T) / 25 mL (50 T), room temperature
Wash Buffer B: 6 mL (30 T) / 10 mL (50 T), room temperature (add 4 volumes of absolute ethanol before first use, mix well and mark the bottle label; tighten the cap after each use)
Elution Buffer E: 1.0 mL (30 T) / 2.0 mL (50 T), room temperature
Spin columns (2.0 mL) with collection tubes (2.0 mL): 30 sets (30 T) / 50 sets (50 T), room temperature
1.5 mL centrifuge tubes: 30 (30 T) / 50 (50 T), room temperature
Storage Conditions Store at 2-8 °C (store each component according to its specified condition). Store extracted DNA at -80 °C.
Shelf Life 1 year.
Package Specifications 30 T, 50 T
Shipping Conditions Shipped with ice packs.
Regulatory / Compliance For research use only.
Compatibility The isolated exosomal DNA is directly compatible with real-time quantitative PCR, gene mutation detection, next-generation sequencing and gene chip analysis.
Application Notes / Precautions 1. All centrifugation steps must be performed at room temperature; centrifugation at 4 °C reduces DNA yield.
2. Turn on the water bath and set it to 56 °C before starting the experiment.
3. Residual ethanol in the wash buffer can inhibit downstream enzymatic reactions (restriction digestion, PCR, etc.); after the final wash, leave the spin column open for 5 min to evaporate residual ethanol completely.
4. The elution volume should not be too small: a volume that is too low reduces recovery efficiency, while a volume that is too high reduces DNA concentration; 30-100 μL is generally recommended.

For research use only, not for clinical use.

0
0

There is no product in your cart.