Blood Glucose Monitoring System, 600 Test Results

Cat.No: CD-QCY-0010 Datasheet Protocol Guide

Quantities:

- +

Add To Cart

Product Introduction

The blood glucose monitoring system is simple in design, easy to operate, and user-friendly. It requires only a small sample volume (1 μL). The memory can store up to 600 test results. The blood glucose monitoring system is used to quantitatively measure glucose in whole blood from a finger capillary. It is intended for use by people with diabetes at home as an aid in monitoring their diabetes management. It is intended for use by a single patient and should not be shared with others. For in vitro diagnostic use only.

How to Test System Specifications Operating Range Features Applicable Scenarios

How to Test

Control Solution

1.Wash hands with soap and water; dry thoroughly
2.Insert a test strip into the meter (printed side facing up, contact end toward the meter)
3.Press < to enter control solution testing mode; the control symbol 🔬 appears
4.Gently swirl and invert the control solution bottle; do not shake
5.Discard the first drop; wipe the bottle tip with a clean tissue
6.Squeeze one drop of control solution onto clean aluminum foil or plastic wrap
7.Touch the test strip tip to the control solution drop until the meter beeps
8.Check if the result falls within the range printed on the test strip vial
9.Press the eject button to discard the test strip into a trash container

Blood

1.Remove a test strip from the vial; close the vial cap immediately
2.Fully insert the test strip into the meter port (printed side facing up, contact end toward the meter)
3.Press > to mark as before-meal test, or press < to mark as after-meal test (optional)
4.Press the lancing device firmly against the fingertip; lance and allow a blood drop to form
5.Touch the test strip tip to the blood drop until the meter beeps; allow blood to be drawn into the reaction zone
6.Wait 5 seconds; the test result displays on the screen
7.Press the eject button to discard the test strip into a trash container

System Specifications

Test Sample	Control solution and blood
Result Range	40-600 mg/dL
Sample Size	1 μL
Test Time	5 seconds
Result Value	Plasma equivalent values
Assay Method	Electrochemical
Power Supply	2 AAA alkaline batteries
Battery Life	Approximately 1,000 tests
Automatic Shut-off	Auto shut-off after 1 minute of inactivity
Weight	1.89 ounces
Size	3.65” x 2.11” x 0.89”
Memory Size	600 test results

Operating Range

Relative Humidity	10% - 90% (non-condensing)
Temperature	50°F-104°F
Hematocrit	15%-60%
Altitude	Up to 10,100 feet

Bluetooth functionality
No coding required
5-second test time
Requires only 1 microliter of sample
Stores up to 600 test results with time and date per day
Supports calculation of 7-day, 14-day, 30-day, and 90-day averages
Pre-meal and post-meal labeling feature
Sample dispensing and testing
Ketone test reminder

Before meal
After meal
Exercise
Sick
Medication
Other